n
When the input source is set to “iPod/USB” and
“Online Music”
On
(Default):
Use i/p scaler function.
Off: Do not use i/p scaler function.
0
“Analog & HDMI” can be set for input sources for which an HDMI input
connector is assigned.
0
Which items can be set depend on the input source assigned to each input
connector.
0
This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601
color, Adobe RGB color, Adobe YCC601 color or computer resolutions.
o
Resolution
Set the output resolution. You can set “Resolution” separately for
HDMI output of the analog video input and HDMI input.
Auto
(Default):
The resolution supported by the TV
connected to the HDMI MONITOR OUT
connector is detected automatically and
the appropriate output resolution is set.
480p/576p / 1080i /
720p / 1080p:24Hz / 4K :
Set the output resolution.
0
When “i/p Scaler” is set to “Analog & HDMI”, the resolution of both the analog
video input signal and HDMI input signal can be set.
(v
p. 154)
0
When set to “1080p:24Hz”, you can enjoy film-like pictures for film sources (in
24 Hz). For video sources and mixed sources, we recommend setting the
resolution to “1080p”.
0
It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a
resolution of 1080p/50Hz.
Contents Connections Playback Settings Tips Appendix
155
Front panel Display Rear panel Remote Index
To Next Page
Loading...
Need help?
General
Weight and Dimensions
