Denon AVR-X3200W

3.8. Operation Info Mode
3.8.1. Actions
This mode enables the unit to display the accumulated operating time, power on count and each protection count.
3.8.2. Starting up
While holding down buttons "
ZONE2 SOURCE
", "
DIMMER
" and "
STATUS
" simultaneously, press the power button to
turn on the power.
Select the "4. OP INFO" using the "
TUNER PRESET CH+ / -
" button, then press the "
STATUS
" button to conrm.
3.8.3. Operations
Press the "
STATUS
" button after starting up this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
FLD
O P T i m e H
↑ Time display
"
STATUS
"
(b) Power on count
FLD
P . O n T i m e
↑ Count display
"
STATUS
"
(c) DC / ASO Protection count
FLD
D C : / A S O :
"
STATUS
"
(d) Thermal Protection (A) count
FLD
T H M A :
"
STATUS
"
(e) Thermal Protection (E/F) count
FLD
T H M E : / F :
"
STATUS
"
(f) Thermal Protection count
FLD
C u r r e n t :
"
STATUS
"
(Returns to normal display)
s
59