Error
Code
Details of Error code Display Coping strategies
5E
Abnormal data in UpdatePacket
received from DM860A
(CheckSumError).
S u b * * * m i n
U p d a t i n g f a i l 5 E
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
5F
Abnormal data in UpdatePacket
received from DM860A
(DataLength/DataNo).
S u b * * * m i n
U p d a t i n g f a i l 5 F
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
60
NACK received in response or no
response from Sub for P command.
S u b * * * m i n
U p d a t i n g f a i l 6 0
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
61
Mismatched CheckSum in response
or no response from Sub for I
command.
S u b * * * m i n
U p d a t e C h e c k N G 6 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
62
Sub μ-com failed to start in the
POWER ON sequence during
Update.
S u b * * * m i n
U p d a t i n g f a i l 6 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
63 Failed to transit to ApplicationMode.
S u b * * * m i n
U p d a t i n g f a i l 6 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
64 Failed to transit to BootLoaderMode.
* * * m i n
U p d a t i n g f a i l 6 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
80
WriteEnableLatchBit not set in Read
after issuing WREN command.
G U I * * * m i n
U p d a t i n g f a i l 8 0
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
81
BlockErase failed in Read after
issuing BE command.
G U I * * * m i n
U p d a t i n g f a i l 8 1
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
82
No UpdatePacket received from
DM860A (TimeOut).
G U I * * * m i n
U p d a t i n g f a i l 8 2
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
83
Abnormal data in UpdatePacket
received from DM860A
(FormatError).
G U I * * * m i n
U p d a t i n g f a i l 8 3
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
84
Abnormal data in UpdatePacket
received from DM860A
(CheckSumError).
G U I * * * m i n
U p d a t i n g f a i l 8 4
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
85
Abnormal data in UpdatePacket
received from DM860A
(DataLength/DataNo).
G U I * * * m i n
U p d a t i n g f a i l 8 5
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
86
Mismatched CheckSum in
CheckSum comparison after
rewriting.
G U I * * * m i n
U p d a t i n g f a i l 8 6
This unit automatically retries several
times. Wait until the FL display stops.
If the FL display stops at the Error
display, press and hold the "Power
operation (
X
)" button for ve seconds.
90
To Next Page
Loading...
