Denon AVR-X4100W Product Manual

Front Panel

Power operation button ( )
Used to turn the power of the MAIN ZONE
(room where this unit is located) on/off
(standby).

Power indicator
This is lit as follows according to the power status:
• White: Power on
• Off: Normal standby
• Red:
•
When “HDMI Pass Through” is set to “On”
•
When “HDMI Control” is set to “On”
•
When “IP Control” is set to “Always On”
 SOURCE SELECT knob
This selects the input source.
 Remote control sensor
This receives signals from the remote control unit.
 Display
This displays various pieces of information.
 MASTER VOLUME knob
This adjusts the volume level.
 Door
When you are using buttons and/or connectors behind the
door, press the bottom of the door to open it. Be careful not
to catch your fingers when closing the door.
1 2 3 4
5
6
7
HOME
Buttons and Connectors Behind the
Compartment Door (2 of 2)
Buttons and Connectors Behind the
Compartment Door (1 of 2)
2

Denon AVR-X4100W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out connectivity	Yes
Audio output channels	- channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
3D	-
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	12600 g