Denon AVR-X4100W Product Manual

Buttons and Connectors Behind the Compartment Door (2 of 2)
 AUX1 HDMI connector
This is used to connect HDMI output compatible devices such as
video camcorders and game consoles.
 USB port
This is used to connect USB storages (such as USB memory devices)
and the USB cable supplied with iPod.
 Headphones jack (PHONES)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the PRE OUT
connectors.
NOTE
To prevent hearing loss, do not raise the volume level excessively
when using headphones.
 BACK button
This returns to the previous screen.
 ENTER button
This determines the selection.
 SETUP button
This displays the menu on the TV screen.
 AUX1 INPUT connector
Used to connect analog output compatible devices such as video
camcorders and game consoles.
 SETUP MIC jack
This is used to connect the supplied Sound calibration microphone.
HOME
DISPLAY
Buttons and Connectors Behind the
Compartment Door (1 of 2)
4

Denon AVR-X4100W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out connectivity	Yes
Audio output channels	- channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
3D	-
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	12600 g