Denon AVR-X4100W Product Manual

Rear Panel (2 of 2)
 Video connectors (VIDEO)
Used to connect devices equipped with video connectors.
 HDMI connectors
Used to connect devices equipped with HDMI connectors.
 NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN
network.
 AC inlet (AC IN)
Used to connect the power cord.
 FM/AM antenna terminals (ANTENNA)
Used to connect FM antennas and AM loop antennas.
 Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
 Speaker terminals (SPEAKERS)
Used to connect speakers.
 PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or an external power
amplifier.
 Component video connectors (COMPONENT VIDEO)
Used to connect devices equipped with component video connectors.
NOTE
Do not touch the inner pins of the connectors on the rear panel.
Electrostatic
discharge may cause permanent damage to the unit.
HOME
REMOTE CONTROL 1REAR PANEL 1
7

Denon AVR-X4100W Specifications

General

Receiver type	Surround
Frequency range	20 - 20000 Hz
Pre-out connectivity	Yes
Audio output channels	- channels
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (20-20KHz@8 Ohm)	125 W
HDMI in	8
Composite video in	4
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Number of HDMI outputs	3
Speakers connectivity type	RCA
Audio formats supported	AAC, AIFF, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Optical drive included	No
3D	-
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS Neo:X, DTS-ES, DTS-HD Master Audio
Power consumption (standby)	0.1 W
Power consumption (typical)	670 W

Weight and Dimensions

Depth	389 mm
Width	434 mm
Height	167 mm
Weight	12600 g