Denon AVR-X7200W Service Manual

YES
YES
YES
YES
Check the TV.
(12) Does the TV support HDCP?
(14) Is HDMI input set on the TV?
(15) Are a picture and sound output when a different TV is used?
Check the unit.
Check the rmware.
Is "IP SCALER ERR" displayed?
(See 22 page)
(13) Does the TV support 1080P/4K?
Use a TV that supports HDCP. Computer monitors can-
not be used.
Check the instruction manual of the TV and check the
input setting.
The TV is faulty.
•Check the circuits around the IP SCALER (U2800,
DIGITAL PCB) and DDR2 (U3000/U3001).
If there appear to be no problems, U2800 or U3000/
U3001 is faulty.
If the TV does not support 1080P/4K, a picture cannot be
output even if the Blu-ray/DVD player is set to 1080P/4K.
NO
NO
NO
YES
NO
See "AVR-X7200W_HDMI Rx-Tx Failure Detection Procedure Manual
ver_1.00" of SDI.
NO
NO
(11) Are a picture and sound output when a different Blu-ray/DVD
player is used?
The Blu-ray/DVD player is faulty.
YES
105

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g