Denon AVR-X7200W Service Manual

1.10. About the error code
See the table below for error codes and details of faults when the rmware is updated through USB memory.
Error
Code
USB Update Error Display Details of Error code Coping strategies
01
C o n n e c t i o n f a i l
0 1
UnabletodetectUSB.
DisconnectandconnecttheUSB
memory.
02
F i l e s N o t F o u n d
0 2
NoFirmwareFileinUSB.
MakesurethattheFirmwareFileisin
theUSBmemory.
03
N o t M a t c h F i r m
0 3
FirmwareFileinUSBforunsup-
portedModelname/area.
CheckthesupportedModelname/area
fortheFirmwareFile.
04
C o n n e c t i o n f a i l
0 4
FailedtoobtainentireFirmware
information.
StarttheUSBUpdateagain.
05
C o n n e c t i o n f a i l
0 5
TimeOutwhileobtainingentire
Firmwareinformation.
StarttheUSBUpdateagain.
08
C o n n e c t i o n f a i l
0 8
Errornoticationreceivedwhile
requestingFirmwareInfo.
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
09
C o n n e c t i o n f a i l
0 9
TimeOutwhileobtainingFirm-
wareinformation.
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
0A
C o n n e c t i o n f a i l
0 A
UnabletodetectUSBforFirm-
wareDownload.
DisconnectandconnecttheUSB
memory.
0B
F i l e s N o t F o u n d
0 B
NoFirmwareFileforFirmware
Download.
DisconnectandconnecttheUSB
memory.
0D
C o n n e c t i o n f a i l
0 D
ReceivedvaluewithinvalidPack-
ageVersion.
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
10
M a i n * * * m i n
U p d a t i n g f a i l 1 0
NoUpdatePacketreceivedfrom
CX870/CY920(TimeOut).
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
11
M a i n * * * m i n
U p d a t i n g f a i l 1 1
AbnormaldatainUpdatePacket
receivedfromCX870/CY920
(CRCError).
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
12
M a i n * * * m i n
U p d a t i n g f a i l 1 2
AbnormaldatainUpdatePacket
receivedfromCX870/CY920
(PacketNoError).
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
13
M a i n * * * m i n
E r a s e f a i l 1 3
BlockErasefailedbeforerewriting
Main.
Thisunitautomaticallyretriesseveral
times.WaituntiltheFLdisplaystops.
IftheFLdisplaystopsattheErrordis-
play,pressandholdthe"Poweropera-
tion"buttonforveseconds.
84

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g