Denon AVR-X7200W User Manual

0
The display switches between track title, artist name, and album title each time the
main unit’s STATUS is pressed.
0
When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album
art data, the album art can be displayed while the music files are playing.
0
If you use Ver.11 or later of Windows Media Player, the album art for WMA files
can be displayed.
0
WMA Lossless files can be played when using a server supporting transcoding,
such as Windows Media Player (Ver.11 or later).
0
This unit plays back picture (JPEG) files in the order in which they are stored in the
folder.
NOTE
0
When playing back music files with your PC or NAS connected through wireless
LAN, audio may be interrupted depending on your wireless LAN environment. In
this case, connect using a wired LAN.
0
Depending on the size of the still picture (JPEG) file, some time may be required
for the file to be displayed.
0
The order in which the tracks/files are displayed depends on the server
specifications. If the tracks/files are not displayed in alphabetical order due to the
server specifications, searching by the first letter may not work properly.
o
Operations accessible through the option
menu
0
“Performing repeat playback” (v p. 140)
0
“Performing random playback” (v p. 140)
0
“Searching content with keywords (Text Search)” (v
p. 142)
0
“Playing back music and a favorite picture at the same time
(Slideshow)” (v p. 143)
0
“Setting the Slideshow Interval” (v p. 144)
0
“Adjusting the audibility of dialog and vocals (Dialog
Enhancer)” (v p. 144)
0
“Adjusting the volume of each channel to match the input source
(Channel Level Adjust)” (v
p. 145)
0
“Adjusting the tone (Tone)” (v p. 146)
0
“Displaying your desired video during audio playback (Video
Select)” (v p. 147)
0
“Adjusting the picture quality for your viewing environment (Picture
Mode)” (v
p. 148)
0
“Playing the same music in all zones (All Zone Stereo)” (v p. 149)
Contents
Connections Playback Settings Tips Appendix
120
Front panel Display Rear panel Remote Index

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g