EasyManuals Logo

Denon AVR-X7200W User Manual

Denon AVR-X7200W
383 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #349 background imageLoading...
Page #349 background image
z1
This item can be selected when surround back speakers are used.
z2
The “Cinema” mode, “Music” mode or “Game” mode can be selected. This item can be selected when using any of the surround back, front height or front wide speaker.
z3
This item can be selected when the input signal is DTS-HD Master Audio.
z4
This item can be selected when the input signal is DTS-HD Hi Resolution.
z5
This item can be selected when the input signal is DTS 96/24.
z6
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD signal.
z7
This can be selected when the Dolby Atmos signal contains the Dolby Digital Plus signal.
z8
This can be selected when the Dolby Atmos signal contains the Dolby TrueHD or Dolby Digital Plus signal.
z9
The default sound mode for the AirPlay playback is “Direct”.
z10
This item can be selected when the input signals contain surround back signals.
z11
This item cannot be selected if the sampling frequency of the input signal is 32 kHz.
z12
This item can be selected if the Auro-3D signal contains DTS-HD Master Audio.
z13
This item can be selected if the Auro-3D signal contains Dolby TrueHD.
z14
This item can be selected if the Auro-3D signal contains Multi Channel PCM.
Contents Connections Playback Settings Tips Appendix
349
Front panel Display Rear panel Remote Index

Table of Contents

Other manuals for Denon AVR-X7200W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-X7200W and is the answer not in the manual?

Denon AVR-X7200W Specifications

General IconGeneral
Receiver typeSurround
Input sensitivity200 mV
Audio output channels11.2 channels
Signal-to-Noise Ratio (SNR)102 dB
Power output per channel (1KHz@6 Ohm)190 W
Power output per channel (20-20KHz@8 Ohm)210 W
HDMI in8
Audio (L/R) in7
Composite video in5
Digital audio optical in2
Ethernet LAN (RJ-45) ports1
Component video (YPbPr/YCbCr) in3
12V triggerYes
Speakers connectivity type-
AM band range522 - 1611 kHz
FM band range87.5 - 108 MHz
Supported radio bandsAM, FM
Optical drive includedNo
DisplayLCD
Product colorBlack
Audio decodersDolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage230 V
AC input frequency50 Hz
Power consumption (standby)0.1 W
Power consumption (typical)780 W
Weight and Dimensions IconWeight and Dimensions
Depth427 mm
Width434 mm
Height196 mm
Weight17800 g

Related product manuals