y Click “Install” on the installation start dialog.
•The installation starts. Do not perform any operation on the
PC until the installation is completed.
y
u In the Windows security dialog, select “Always trust software
from DandM Holdings Inc.”.
i Click “Install”.
i
u
o When the installation is completed, click “Finish”.
o
6
With the unit power o, connect the unit and PC using
a USB cable (sold separately).
•For the connection procedure, refer to the “Connecting
devices” (vpage11) section.
7
Press X on this unit.
•When the unit power is turned on, the PC automatically finds
and connects to the unit.
8
Touch to change the input source to “USB-DAC”.
To Next Page
Loading...
