9
Checking the installed driver.
q Click the “Start” button and click “Control Panel” on the PC.
•The control panel setting list is displayed.
w Click the “Sound” icon.
•The sound menu window is displayed.
e Check that there is a checkmark next to “Default Device”
under in “Digital Audio Interface” of the “Playback” tab.
•When there is a checkmark for a dierent device, click
“Denon USB Audio” and “Set Default”.
10
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
q Select “Digital Audio Interface” and click “Properties”.
•The Digital Audio Interface Properties window is displayed.
ApplyCancelOK
Properties
Select a playback device below to modify its settings：
Digital Audio Interface
Denon USB Audio
Default Device
Speakers
Ready
Sound
Configure Set Default
Playback
Recording CommunicationsSounds
q
To Next Page
Loading...
