Denon DN-V310 - Get Title and Chapter Command (GetC)

１６
Description of PS Commands (continued)
16. Get current title and chapter number confirmation request ( GetC ) ---- Valid for DVDs discs
<Format> [PS,GetC]<CR>
<Reply> [PS,GetC,Error code,Title No.,Chapter No.]
(For the error codes, refer to the list of error codes on page 6.)
<Details> ・In the play or pause mode, requests the current title number and chapter number.
・In response to the request, the DN-V310 returns the error code corresponding to the
sent command and the current title number and chapter number.
・If a disc other than a DVD is loaded, error code 10 is returned.
Example: To check the number of the title and chapter of the DVD currently playing on
the DN-V310
[PS,GetC]<CR> → A request for the current title and chapter number is sent from the
controller.
[PS,GetC,0,3,1] ← The sent message’s error code 0 (no error) and title number 3 and
chapter number 1 are returned from the DN-V310.