The following transition occurs during an update. The same occurs in network and USB updates.
The network connection is
complete
FIRMWARE UPDATE PROCE-
DURE
Rebooting
Setting complete
Network connection com-
plete
Blue : Solid Amber : Blinking Blue : Slow Blinking Blue : Solid
Amber blinking = About 250ms On/Off
The following transition occurs during a Service Region Settings update.
Connect USB Change region Change complete END
Blue : Solid Green : Blinking Blue : Blinking(X times) Blue : Solid(7sec.)
X=The indicator blinks the same number of times as the region number being set. (North America=1, Europe=2, Japan=3, Australia=4,
Korea=5)
The following transition occurs during a service release type update.
Connect USB Change release type Change complete END
Blue : Solid Green : Blinking Blue : Blinking (3 time) Blue : Solid (7sec.)
The following transition occurs on startup.
Power off Starting Setting complete
Connected to network
Led : Off Blue : Blinking Blue : Solid
Setup not completed
Refer to "QSG".
Set up the network connec-
tion
Amber : Solid
1. Updating
2. Updating (Service region settings)
3. Updating (Service Release Type)
4. On startup of HEOS (when power is turned on)
Press and hold the "
Bluetooth
" button before inserting the power plug, then insert the power plug
while holding down the button and wait for more than 5 seconds.
Network connected Resetting to factory default Starting Not set up
Blue : Solid Amber : Blinking Blue : Blinking
Amber : Solid
(Blinking -> lit)
*Blue indicator blinks mo-
mentary during the process
Amber Blinking = About 750ms On/Off : About 130sec
Press and hold the "
Bluetooth
" and "
Connect
" buttons for 5 seconds or more while connected to the
network.
Network connected Soft reset start Starting Not set up
Blue : Solid Amber : Fast Blinking Blue : Blinking
Amber : Solid
(Blinking -> lit)
Amber Blinking = About 250ms On/Off : About 25sec
The following transition occurs on startup.
Power off Starting Critical Error
Firmware Error
Led : Off Blue : Slow Blinking Red : Slow Blinking
Critical Error
Hardware Error
Red : Fast Blinking
Slow Blinking : 750ms On/Off, Fast Blinking : 250ms On/Off
5. Factory Reset
6. Software Reset (Clear user settings)
7. Critical Error
Status LED Connect in Status LED
LED STATUS
53
Caution in
servicing
Electrical Mechanical Repair Information Updating
To Next Page
Loading...
