Security
Used to edit the wireless security options.
ESSID Shows current SSID.
Broadcast ESSID Enable or disable Broadcast ESSID.
Encryption Select which type of network encryption
to use or turn o encryption by selecting
“Disable”.
• In case WEP is selected in above “Encryption”
Authentication Type Select authentication type.
Key Length Select WEP key length.
Key Type Select WEP key type.
Default Key Select Encryption Key 1 to Key 4.
Encryption Keys 1-4 Specifies encryption key up to 4.
• In case WPA is selected in above “Encryption”
WPA Type Select WPA Type.
Pre-shared Key Type Select pre-shared key type.
Pre-Shared Key Specifies pre-shared key.
Access Control
Used to enable MAC Address Filtering to limit access to the HEOS Extend.
Wireless MAC filtering Enable or Disable MAC address filtering.
MAC Address List List of registered MAC address.
WPS
Used to edit the Wi-Fi Protected Setup mode settings.
WPS Current Status Shows whether the WPS function is
Configured or unConfigured.
When it is Configured, the WPS has been
used to authorize connection between the
device and wireless clients.
Self Pin Code Shows the WPS PIN code of this device.
SSID Shows the SSID (wireless network name) for
reference.
Authentication Mode Shows the encryption method used by the
WPS process.
Passphrase Key Shows the pre-shared key configured in
Security section.
WPS via Push Button Click this button to start WPS using the push
button method.
Wireless Clients
Displays a list of the MAC addresses for all connected devices.
To Next Page
Loading...
