2 Network
LAN
Configuration Type Select Dynamic or Static configuration.
IP Address IP address, subnet mask, default gateway.
2 Management
Admin
Old Password Enter the current password for the Extend.
(default is “password”)
New Password Enter the new password that you wish to use.
Confirm Password Re-enter the new password that you wish to
use.
Firmware Update
To perform the Firmware Update:
1
Click the Browse button and navigate the OS File System
to the location of the upgrade file.
2
Select the upgrade file. The name of the file will appear
in the Upgrade File field.
3
Click the Apply button to start the firmware upgrade
process.
Caution
The device is unavailable during the upgrade process and must restart when the
upgrade is completed. Any connections to or through the device will be lost.
To Next Page
Loading...
