EasyManuals Logo

Denon RCD-CX1 Service Manual

Denon RCD-CX1
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
RCD-CX1
SERVICE MODE
1. Aging mode
(1) Entering the test mode
To enter the test mode, press the button in the aging mode.
Basically, the test mode should be set in the stop mode after the disc is loaded in the heat run mode.
(The aging mode is entered by pressing the “SOURCE” and buttons simultaneously to turn on the AC power.
When the heat run mode is set, the PLAY and PAUSE indicators light.)
Press “SOURCE” and buttons simultaneously
Power turns on
button Press or button
Test mode Heat run mode
FL tube display when test mode entered
The discs playable in the Heart Run Mode are the discs shown on the table.
(2) Selecting the mode and deciding
The following modes are available.
Press the or button to select each mode and press the button to set that mode.
Press the button to return to the mode originally set when the test mode was entered.
(1) FL tube lighting mode : T0
(2) Tray open/close mode : T1
(3) Laser on/off (CD/DVD) mode : T2
(4) Servo adjustment value display mode : T3
(5) Trace mode (error rate display) : T7
(6) Servo properties measurement mode : TA
(7) Accumulated laser on time display mode : TB
(8) Monitor terminal setting mode : TD
(9) SACD watermark signal quality checking mode : TE
(10) Self test mode : TF
FLDisplay(Thedisplaypartof8digits)
12345678
Tes tMode
DVD-Audio DVD-Video Video CD CD CD-R CD-RW
DVD-R
DVD+R
DVD-RW
DVD+RW
SUPER
AUDIO CD
Recordable
Mark
(logo)
Playable
discs
サービスモードについて
1. エージングモード
(1) テストモードの設定
テストモードの設定はエージングモード時に ボタンを押しておこないます。
基本的にヒートランモード時にディスクローディング後の停止状態でテストモードに設定します。
( エージングモードの設定は "SOURCE" ボタンを同時押ししながらセットの電源を入れます。
ヒートランモードになると PLAY インジケータと PAUSE インジケータが点灯します。
"SOURCE" ボタンの同時押し
電源ON
ボタン または ボタン
テストモード ヒートランモード
テストモード設定時の FL 管表示
ヒートランモード時は、下記ディスクの再生が可能になります。
(2) モードの選択と確定
モードには、次のモードがあります。
または ボタンで各モードを選択し、 ボタンで確定します。
ボタンでテストモード投入時の状態に戻ります。
(1)FL 管点灯モード : T0
(2) トレイ OPEN/CLOSE モード : T1
(3) レーザー ON/OFF(CD/DVD) モード : T2
(4) サーボ調整値表示モード : T3
(5) トレースモード ( エラーレート表示 ) : T7
(6) サーボ特性測定モード : TA
(7) レーザー ON 累積時間表示モード : TB
(8) モニタ端子設定モード : TD
(9)SACD ウォーターマーク信号品質確認モード : TE
(10)自己診断モード : TF
FL 管の表示 (8 桁の表示部 )
12345678
Tes tMode
1 / 3 ボタン
ヒートラン実行
Excuting Heat run
1 / 3 button

Other manuals for Denon RCD-CX1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon RCD-CX1 and is the answer not in the manual?

Denon RCD-CX1 Specifications

General IconGeneral
BrandDenon
ModelRCD-CX1
CategoryCar Receiver
LanguageEnglish

Related product manuals