Denon RCD-M39 - CD Mecha

14
3. CD MECHA
(1) Remove the screws.
(2) Pull out the TRAY.
(3) Cut the wire clamp band, then disconnect the connector wires. Remove the screws.
Proceeding : TOP COVER
LOADER PANEL
→
FRONT PANEL ASS'Y
→
CD MECHANISM ASS'Y
→
Direction of photograph: D
CD MECHA
You can slide in the arrow direction to pull out the TRAY.
Direction of photograph: B
CMMD
FCMC
PMUP
PMMO
PMSN
cut