Chapter 2 Getting Started the BHT and System Mode
If you select one of "1: DESTINATION IP" through "5: COUNT" items
and press the ENT key, then the entry box of that item becomes ready
to accept entry and a cursor appears. Enter the desired value by
using the numerical keys and period (.) key, and then press the ENT
key.
In the entry mode, to delete a single character, press the BS key. To
delete the whole entry you made, press the C key.
If "6: SEND TYPE" is selected, use the F7 and F8 keys to choose the
desired type.
To return to the TEST PING menu, press the C key when any item is
highlighted.
Entry Range for DATA SIZE, INTERVAL, TIMEOUT, and COUNT
Item Allowable entry range Initial value
DATA SIZE 4 to 1472 56
INTERVAL 0 to 65535 10
TIMEOUT 0 to 65535 10
COUNT 0* to 65535 4
* Specification of zero (0) will set the number of echo requests to "infinite," keeping sending echo
requests (until PING is aborted).
If you specify a value out of the allowable entry range listed above, the nearest value within the range will
automatically apply.
87
To Next Page
Loading...
