Chapter 2 Getting Started the BHT and System Mode
[ 4 ] System Environment Setting
On the SYSTEM MENU, selecting "4: SET SYSTEM" calls up the
screen shown at left.
[1] EXECUTE PROGRAM: Sets an auto-start execution program to
be run when the power is turned on.
[2] DISPLAY: Sets the message version (English o
Japanese).
[3] DATE/TIME: Sets the calendar clock (date and time).
[4] BARCODE: Sets the special barcode scanning
parameters (the black-and-white
inverted label reading and the decoding
level) and the minimum number of digits
to be read for bar codes (ITF, STF and
Codabar).
[5] COMMUNICATION: Sets the communications environments
(interface port and communications
parameters).
[6] KEY: Defines the functions of the shift key
and magic keys.
[7] RESUME: Sets the resume function.
[8] DEFRAG: Defragments the drive.
[9] TCP/IP: Sets the TCP/IP, FTP and DHCP (in
LAN-support software only).
Select a desired item by using the numerical keys or F5 and F6 keys,
and the selected item becomes highlighted. Then press the ENT key.
Press the C key to return to the SYSTEM MENU.
53
To Next Page
Loading...
