Chapter 2 Getting Started the BHT and System Mode
Host PC
Models: PC/AT, PS/2
Operating Systems and Optional Application Programs
Operating Systems (OS) Win98 WinNT 3.51/4.0 Win2000 Professional Win XP
BHT-BASIC 4.0
Development Pack
• BHT-BASIC 4.0 Compiler
• BHT-BASIC4.0 Remote
Debugger
– – √ √
BHT-BASIC4.0 Transfer
Utility*
√ √ √ √
*This application does not activate any built-in IrDA interface port.
CU-301/321 and RS-232C/USB Interface Cable (options)
The CU-301/321 is an optical communication unit for the BHT-300B. It controls data and program
transfer between the BHT and host PC. It communicates with the BHT using infrared (Ir) light and with
the host PC over an RS-232C cable (for CU-301) or USB cable (for CU-321).
You can directly connect two BHTs with each other by using a commercially available metal cable
having 3-pole mini stereo plugs (as a direct-connect interface cable). You also connect the BHT directly
with the host PC or with the modem by using the direct-connect interface cable compatible with the
target equipment. (NOTE: The direct-connect interface port of the BHT is not designed to stand frequent
connecting/disconnecting. You are, therefore, recommended to use the CU-301/321 where you expect
to do a lot of connecting and disconnecting of the BHT to/from a host PC.)
BHT-BASIC 4.0 Development Pack (option)
The BHT-BASIC 4.0 development pack is a package that contains a full set of tools necessary for
developing applications for the BHT series. It allows you to jump-start your development work.
• BHT-BASIC 4.0 Compiler
Compiles and links a source program written in BHT-BASIC 4.0 to create a user program executable
on the BHT (*.PD4).
• BHT-BASIC 4.0 Remote Debugger
Debugs application programs running on the BHT.
• BHT-BASIC4.0 Transfer Utility
Transfers a user program (*.PD4) to the BHT. For details, see “BHT-BASIC4.0 Transfer Utility” below.
• BHT-PC Cable (RS-232C)
11
To Next Page
Loading...
