Setting the interface port
On the SET COMMUNICATION menu, select the "3: COM PORT" to
call up the screen shown at left.
Highlighted is the current setting.
[1] BASIC: Selects the IrDA (Optical) or direct-connect
(Connector) interface port to be used for use
programs written in BHT-BASIC (OPE
"COM:").
[2] SYSTEM MODE: Selects the IrDA (Optical) or direct-connect
(Connector) interface port to be used fo
downloading or uploading files in System
Mode.
Select a desired item by using the numerical keys or F5 and F6 keys.
Then select a desired setting by using the F7 and F8 keys.
To return to the SET COMMUNICATION menu, press the C key.
64
To Next Page
Loading...
