4
Installation
– It is recommended to connect
only Denver accessories and
options, as these are optimally
designed for use with your
balance/scale.
– Do not open the balance/scale
housing as this will void the
manufacturer’s warranty.
Symbols
The following symbols are used
in these instructions:
● indicates steps you must
perform
$ indicates steps you must
perform only under certain
conditions
> describes what happens after
you have performed a certain
step
– indicates an item in a list
! indicates a hazard
Warnings and Safety Precautions
Safety Information
● To prevent damage to the equip-
ment, please read these operat-
ing instructions carefully before
using your balance/scale.
! Do not use this equipment in
hazardous areas.
! Make sure the voltage rating
printed on the power supply is
identical to your local line volt-
age.
! Use only commercially available
9V batteries (not included).
If desired, you can use a
rechargeable battery.
– The balance/scale is energized at
all times unless you disconnect
the AC adapter and, if connect-
ed, the battery.
– Protect the AC adapter from
contact with liquid
! Exposure to excessive electro-
magnetic interference can cause
the readout value to change.
Once the disturbance has
ceased, the instrument can be
used again in accordance with
its intended purpose.
To Next Page
Loading...
