Derby cycle Impulse 2.0 pedelec - Fuel Consumption ØEN-55; Fuel Type; Power Cost

Original User Guide | Impulse 2.0 Pedelec Version 3 EN-55
6.8.2.17 Fuel consumption Ø
Path: Target cost I Fuel consumption Ø
You can enter the average fuel consumption that would result in the use of
a car.
1. In the main menu, navigate to the option "Fuel consumption Ø" as
described under  6.8.1.2 Navigating within a menu P. EN-45.
2. Use the
/
buttons to select the desired value in euros. You can
specify 0 to 9 euros, in steps of 1 euro.
3. The selection is highlighted in bold.
4. Conrmbypressingthe
button.
5. Use the
/
buttons to select the desired value. The consumption can
be set in half-litre increments from 0 to 20 litres.
6. Conrmbypressingthe
button. You will return to the sub-menu 1
level.
6.8.2.18 Fuel type
Path: Target cost I Fuel type
1. The option "Fuel type" allows you to choose between petrol and diesel.
2. In the main menu, navigate to the option "Fuel type" as described
under  6.8.1.2 Navigating within a menu P. EN-45.
3. Use the
/
buttons to select petrol or diesel. The selection is
highlighted in bold.
4. Conrmbypressingthe
button. You will return to the sub-menu 1
level.
6.8.2.19 Power cost
Path: Target cost I Power cost
The option "Power cost" allows you to enter the electricity price in cents.
1. In the main menu, navigate to the option "Power cost" as described
under  6.8.1.2 Navigating within a menu P. EN-45.
2. Use the
/
buttons to select a value between 0 and 99 cents. This
can be set in 1 cent increments. The selection is highlighted in bold.
3. Conrmbypressingthe
button. You will return to the sub-menu 1
level.