Det-Tronics R7404 - Ordering Information; Options; Recommended Spare Parts

7.1 24 95-8242
ORDERING INFORMATION
When ordering specify:
— R7404 Controller
— C7050 Detector
— Detector housing material
Aluminum
316 stainless steel
— Cover locking assembly (if required to comply with
local regulations)
Special Purpose C7050 Detectors:
— Nuclear Surveillance Detector for applications
involving x-rays or gamma radiation.
— Internal Reection
o
i
can extend detector
maintenance intervals in applications involving oily
contaminants.
Special Purpose R7404 Controllers:
— STAR (Selectable Transient Arc Rejection)
Logic Controller is recommended for uncontrolled
applications where transient electric arcs, such as
those produced in electrostatic power coating or
paint spraying booths, can cause false actuation of a
standard UV system.
— High Speed Suppression Controller is designed for
use with the R1425 Detonator Module for protecting
installations where extremely fast system response
times are required.
— Remote Surveillance Controller significantly
reduces false alarms caused by UV interference that
is generated by sources outside the protected area.
— Nuclear Surveillance Controller is designed for use
with the nuclear surveillance detector in applications
involving interference from x-rays and gamma
radiation.
OPTIONS
— Q4004 Mounting Cage, which accommodates up
to eight modules, is designed to fit a standard 19
inch instrument rack and is recommended for ease
of installation and service. Cages that hold fewer
modules are also available.
— Filler Panels for empty spaces in the optional
mounting cages.
— Voltage Converters are available for p rov iding sys tem
power from ac line (mains) voltage.
— Q1113 Air Shield provides a continuous flow of clean
air across the viewing window of the detector to
reduce the accumulation of certain types of airborne
contaminants.
— Q9001 Swivel Mounting Assembly for mounting
the C7050 Detector. Use the Q9001B for C7050
Detectors with aluminum housings and the Q9001H
for C7050 Detectors with nickel/brass and stainless
steel housings.
— R6006 Relay Output Moduleisusedinconjunction
with the R7404 when supervised relay outputs are
required. The relays are energized by the solid
state output signals generated by the controller. The
R6006 provides eight relays and offers optional load
monitoring. The relays have form C contacts (normally
open/normally closed) and are rated up to 3 amperes
at up to 30 vdc or 250 vac.
— R6007 Auxiliary Relay Output Assembly provides
the user’s choice of either 4, 8, 12, or 16 form C relay
contacts. A pre-wired connector backplate eliminates
the need for external wiring between the controller
and the relay assembly.
— R1425 Detonator Module provides input and output
monitoring and is used in applications where the
fastest possible system response is required.
RECOMMENDED SPARE PARTS
— 2 ampere micro fuse for R7404 (part number 101363-
001).
— o
i
ring for UV detector (part number 003088-001).
— O-rings for UV detector (part number 107427-004).
— UV tube module (part number DE1888).
— Window Cleaner squeeze bottle, package of six (part
number 001680-001).
— Window Maintenance Kit, includes 2 bottles of cleaner
and 8 o
i
rings (part number 002507-001).
Forassistanceinorderingasystemtotyourapplication,
please contact:
Detector Electronics Corporation
6901 West 110th Street
Minneapolis, Minnesota 55438 USA
Operator:(952)941-5665or(800)765-FIRE
Customer Service: (952) 946-6491
Fax:(952)829-8750
Web site: www.det-tronics.com
E-mail: det-tronics@det-tronics.com