9
Several Parties
Starting a Three-Party
Conference
GR3G…
You are speaking with someone on
the telephone. You set up a further
connection (e.g. by consultation or
by accepting a call). You can toggle
between these parties (see Toggling
on page 8) or press the keys
R3
to start a three-party conference and
speak to both parties at the same
time.
On ISDN telephones you start a
three-party conference by means of
the corresponding function key or a
menu.
Ending a Three-Party
Conference
Toggle: GR2
End: h
To end a three-party conference and
continue telephoning with only one
of the other two parties, press the
keys
R2 to switch to the toggle
mode. Then you can disconnect one
of the parties (see Disconnecting a
Call on page 8). You end a three-
party conference by replacing the
handset.
On ISDN telephones you end a
three-party conference by means of
the corresponding function key or a
menu.
Connecting Two External
Parties with Each Other
R#h
You are speaking with an external
party and have another (external)
call on hold. With this procedure you
can connect the two parties with
each other.
On ISDN telephones you use the cor-
responding function key or a menu.
Please note: If you connect two
external parties whom you called,
you will be charged for the cost of
the resultant call.
Connecting Two Parties
(Internal/External) with
Each Other
h
You are speaking with an external
party and have another (internal)
call on hold. You can connect the
two parties with each other by
simply hanging up the handset.
To Next Page
Loading...
