10
Call Protection
Call Protection
Call Waiting On/Off
On: H*43#
Off:
H#43#
If you are called while you yourself
are telephoning, you will hear the
call-waiting signal which tells you
that there is a second party wishing
to speak to you. You can deactivate
the call-waiting signal (call waiting
off, call-waiting protection on) and
reactivate it (call waiting on, call-
waiting protection off). When call-
waiting protection is active, the
caller hears a busy signal.
On ISDN telephones you activate/
deactivate call waiting by means of
the corresponding function key or a
menu. Hunt group calls to ISDN tele-
phones do not activate the call-wait-
ing signal.
Accepting a Waiting Call
End: GhHG…
Toggle:
GR2G…
While you are telephoning, the call-
waiting signal tells you that there is
a second party wishing to speak to
you. You can end the first call and ac-
cept the new call; or you can hold
the first call, accept the second call
and toggle between the two.
If you toggle between the parties,
you can also start a three-party
conference (see Starting a Three-
Party Conference on page 9).
On ISDN telephones you accept the
call request indicated by the call-
waiting signal by means of the cor-
responding function key or a menu.
Rejecting a Waiting Call
GR0G…
While you are telephoning, the call-
waiting signal tells you that there is
a second party wishing to speak to
you. You can reject the waiting call,
in which case the caller will then
hear a busy signal.
On ISDN telephones you reject a
waiting call by means of the corre-
sponding function key or a menu.
To Next Page
Loading...
