DETEWE opencom 100 - System Requirements

5
Making Calls
On manual seizure
of external line
H Z (internal tel. no.)
If you hear the internal dialling tone
when you lift the handset, you can
dial the internal number straight
away.
Making External Calls
On automatic seizure
of external line
H Z (external tel. no.)
If you hear the external dialling tone
when you lift the handset, you can
dial the external number straight
away.
On manual seizure
of external line
H Z (external access code, e.g.
0)(external tel. no.)
If you hear the internal dialling tone
when you lift the handset, you must
press the external access code be-
fore dialling the external number.
Your system administrator will set
this code for all subscribers in the
OpenCom 100 and inform you of the
currently valid value.
Note: This also applies to all con-
sultation calls and to call forwarding
to external numbers (but not to
“MSN” call forwarding).
Speed Dialling
H*7Z (speed-dialling no.)
For consultation calls:
GR*7Z (speed-dialling no.)
Alternatively:
H*7*
Z (speed-dialling no.) #
For consultation calls:
GR*7*
Z (speed-dialling no.) #
You can use this procedure to call a
number from the central telephone
book by entering its 2-digit speed-
dialling code (00 to 99).
The central telephone book is man-
aged by users who have appropriate
authorisation. The OpenCom 100
can store up to 2,000 telephone
numbers. Two-digit speed-dialling
numbers can be configured for
100 telephone numbers.
Accepting a Call
HG…
When your telephone rings, lift the
handset or press the hands-free key.
The type of ringing signal indicates
whether it is an internal or external
call.