DETEWE opencom 100 - Announcement; Callback on Busy

17
Special Calls
The time span is set to a value be-
tween 0 and 20 seconds in the
OpenCom 100. It is set by your sys-
tem administrator for all
OpenCom 100 users. Please ask him
for the current value.
Announcement
H*13*
Z
(internal tel. no.) #
For consultation calls:
GR*13*
Z
(internal tel. no.) #
Using this procedure you can make
announcements to system tele-
phones. The loudspeaker of the
destination telephone is activated
without a ring, and your announce-
ment is heard by those present in
the room.
If you want to start an announce-
ment on several system terminals to
a hunt group phone number at
which the call is signalled simultane-
ously for example, all called sub-
scribers hear the announcement at
that same time. If one of these sub-
scribers responds to the announce-
ment (by answering the call), the an-
nouncement connection to the
other system terminals is termi-
nated.
Note: If a called party is a member
of a user group for which Intercom
protection is activated, announce-
ments will not be made for his tele-
phone number.
Callback on Busy
If the internal or external number
you have dialled is busy, you can
leave a callback request. (This is not
possible if the destination number is
a hunt group telephone number.)
Your telephone will ring as soon as
the other party has ended his call.
When you lift the handset, the
number of the other party will be di-
alled.
Leaving a callback request
GR*37#
Alternatively:
G6h
On ISDN telephones you can activate
“callback on busy” by means of the
corresponding function key or a
menu.
Cancelling a callback request
G#37#
You cancel your callback request
with this procedure.