12
Forwarding Calls
this other party, you will pick up the
next call lined up in this queue.
Note: If pick-up protection is acti-
vated in the called party’s user group,
you cannot pick up calls to his tele-
phone number selectively.
Logging out of/into All
Hunt Groups
You can log out of or into all hunt
groups configured for you.
Logout:
H*31#
Login: H#31#
Logging out of/into
Individual Hunt Groups
Logout: H*31*
Z (internal tel. no.) #
Login: H#31*
Z (internal tel. no.) #
Using your own telephone number,
you can log out of or into individual
hunt groups configured for you.
All hunt group calls are configured
by your system administrator.
Note: Your logout from a hunt
group will not go into effect if you are
the last available member of a hunt
group. The system ensures that in-
coming calls for a group can always
be signalled to at least one terminal.
Forwarding Calls
Call Forwarding
You can forward internal or external
calls intended for yourself (with the
exception of hunt group calls) to
another (internal or external) tele-
phone number. You can decide
whether only internal, only external
or both types of calls are forwarded.
If OpenVoice, the integrated voice-
mail system of OpenCom 100, has
been installed, calls can also be for-
warded to a voice box which has
been configured for you.
Calls can be forwarded either imme-
diately, after a specified period of
time (delay) or if the line is busy. You
can configure more than one call for-
warding mode (“Instant”, “After De-
lay” or “On Busy”). However, only
one forwarding function can be acti-
vated for each mode.
Example:
You can configure “Instant
forwarding of external calls” to
the number 333, and “After
To Next Page
Loading...
