4
Making Calls
Glossary
If you would like more details about
any of the system features described
in this Quick Reference Guide, please
refer to the “Glossary” supplied with
your OpenCom 100 (see PDF file on
the enclosed CD-ROM).
Signals & Symbols
Audio and Ringer Signals
You will find a table showing the au-
dio and ringer signals on the inside
back cover of this Quick Reference
Guide.
Symbols
H lift the handset
GR press the R key
during the current call
(“consultation call” mode)
* press the star key
7 press digit key “x” (7 here)
# press the hash key
Z (xxx) dial the digits of the tele-
phone number (tel. no.) “xxx”
G…speak
h hang up the handset
Making Calls
Seizing an External Line
If you hear the external dialling tone
when you lift the handset, your ter-
minal has been set to automatic
seizure of the external line. If, on the
other hand, you hear the internal di-
alling tone when you lift the hand-
set, your terminal has been set to
manual seizure of the external line.
Making Internal Calls
On automatic seizure of external
line
H** Z (internal tel. no.)
If you hear the external dialling tone
when you lift the handset, you must
press the star key twice (
* * )
before dialling an internal number.
Note: This also applies to the desti-
nation numbers you specify when
configuring call forwarding or a baby
call.
To Next Page
Loading...
