DEUTSCHTEC PRIMEDRIVE

Questions and Answers

C
christine94Aug 11, 2025
Why won't my DEUTSCHTEC PRIMEDRIVE Door Opening System open?
- X
  xwoodsAug 11, 2025
  Your DEUTSCHTEC Door Opening System might not open because the rotary switch is set to the ‘Close’ mode. Change the operating mode to resolve this. Alternatively, the emergency shutdown button might be activated. If so, reset (deactivate) the emergency shutdown button. Another potential cause is that the main power supply is inaccessible and the battery is inoperative. Connect the main power supply and check the battery.
J
Jordan HarrisAug 21, 2025
What to do if my DEUTSCHTEC Door Opening System remains open?
- L
  Luke ChavezAug 21, 2025
  If your DEUTSCHTEC Door Opening System remains open, it could be due to several reasons. The emergency shutdown button might be activated in the fully-opened position; try resetting (deactivating) it. Another possibility is that the safety sensors are activated, indicated by a red LED at the sensor. Remove any obstacle that is in the door’s threshold range. Also, check if the main power supply is inaccessible and the battery is inoperative; if so, reconnect the main power supply and check the battery.
J
Jonathon QuinnAug 31, 2025
Why does my DEUTSCHTEC Door Opening System move forward then backward?
- R
  Richard LeeAug 31, 2025
  If your DEUTSCHTEC Door Opening System moves forward a few centimeters and then moves backward, it could be because the safety sensors detect an obstacle in the door’s threshold range. Remove the obstacle.

DEUTSCHTEC PRIMEDRIVE Specifications

General

Category	Door Opening System
Manufacturer	DEUTSCHTEC
Model	PRIMEDRIVE
Operating Voltage	230V AC
Power Consumption	100W
Operating Temperature	-20°C to +50°C
Protection Class	IP20
Manual Operation	Manual release in case of power failure
Mounting Type	Surface-mounted

DEUTSCHTEC PRIMEDRIVE - User Manual

Table of Contents

Questions and Answers

DEUTSCHTEC PRIMEDRIVE Specifications