Contents
1
EN.22.04032019
4.1
Check leaves and opening dimentions
9
4.3
Use laser level to specify second point-corridor mounting
10
4.2
Install bracket on both side walls - corridor mounting
10
9
Installation steps
4.
Safety Instructions
1.
3
Initial Assembly
1.1
3
Maintenance
1.2
3
Explanation of Symbols
1.4
3
Operation
1.3
3
Contents of Delivery
2.
5
Commencing Assembly
3.
8
Technical Data
3.1
8
Required Tools
3.2
8
Hang on back profile on bracket-corridor mounting
11
4.4
4.5
Fix back profile-corridor mounting
12
4.7
Fix the rail - on facade
13
4.6
Adjust rail horizontally - on facade
12
Insert nuts and screws in rail groove
13
4.8
4.9
Install rail profile and track profile
14
4.11
Install hangers through the rail
15
4.10
Install stoppers
15
Fix the counter rollers and mind the 0.5 mm gap
16
4.12
4.13
Install components
17
4.15
Check components‘ layout
19
4.14
Install lock (optional)
18
Hang on the rail on back profile-corridor mounting
20
4.16
4.17
Fix the rail-corridor mounting
20
4.19
Install filler for each fixed leaf-corridor mounting
21
4.18
Install notch on side walls-corridor mounting
21
Install joiner plate on each fixed leaf-corridor mounting
22
4.20
4.21
Slide side leaves
22
4.23
Turn the screw until it touches the back profile-corridor mounting
23
4.22
Fix side leaves-corridor mounting
23
Drill a hole for sensor through the rail and back profile
24
4.24
4.25
Cleaning
24
4.27
Hang on moveable leaves
25
4.26
Install floor guides
25
Adjust leaves‘ clearance
26
4.28
Declaration of Incorporation
1.5
4
To Next Page
Loading...