3
1. Safety Instructions
We recommend that you follow the instructions described below in
order to avoid material damage and personal injuries. All of the
instructions that need to be followed with a special degree of diligence
have been marked with a symbol. If you have any questions, we
recommend that you contact your supplier. Although we have exercised
a great degree of diligence in creating these instructions, they do not
absolve you of your own responsibility. All the tasks should be carried
out by professionals or by trained personnel. Deviations can result in
faulty functioning and voiding the warranty. Use protective equipment,
gloves and goggles.
1.1 Initial Assembly
Secure your installation site against unlawful entry by unauthorized individuals. Ensure that the location in
question is well-lit and that the floor is secure. Use appropriate measures to protect the site from
contaminants. Check the stability of the structure. Work on electrical systems must be performed by
authorized staff. Deutschtec GmbH shall not be liable for accidents caused by improper assembly,
maintenance and operation.
1.2 Maintenance
Before work, examine the status of the door, particularly the safety elements, and the general condition.
Damage to the glass, the electrical feed and the mechanical function (e.g. stiffness and wedging) must
be repaired prior to maintenance. Secure your installation site against unlawful entry by unauthorized
individuals.
1.3 Operation
Check the operational status of the door on a daily basis. In case of operational irregularities,
decommission the door and notify your service partner. When the system is locked, the escape function
is disabled!
1.4 Explanation of Symbols
Warning: Risk of Injury
Wa r n i n g: Electri c Shock P o s s i ble
(risk of injury or death) Repairs should be
carried out by an electrician.
EN.22.04032019
To Next Page
Loading...