Deutz 914 - 6.1 Lubrication System; 6.1.3 Replace Oil Filter

6
Service and Maintenance
6.1 Lubrication System
6.1.3 Replace Oil Filter
● Clean any dirt from the filter carrier sealing
surface.
● Lightly oil the rubber gasket of the new lube
oil filter cartridge.
● Manually screw in the new cartridge until
the gasket is flush.
● Tighten the lube oil filter cartridge with
another half-turn.
● Check the oil level, see 6.1.2
● Check oil pressure, see 3.3.1.
● Check lube oil filter cartridge seal for leaks.
● Undo the lube oil filter cartridge using a
commercial tool and spin off.
● Catch any escaping oil.
Caution is required in the case
of hot oil: Risk of scalding!
Please dispose of oil in an
environmentally-friendly
manner!
© 25 881 0© 25 880 0 © 25 882 0