Devolo dLAN 550+ WiFi - Page 13

12 Introduction
devolo dLAN 550+ WiFi
For more information, refer to Chapter 3.3 Con-
necting the dLAN 550+ WiFi.
Reading the dLAN indicator light
The integrated indicator lights (LEDs) show the dLAN
status for the dLAN 550+ WiFi by illuminating and/or
flashing:
Check whether the adapter is connected to the
mains supply correctly and whether the encryp-
tion process has been carried out successfully.
For more information about this, refer to 3.3
Connecting the dLAN 550+ WiFi.
Flashing behaviour of the dLAN LED
LED
Flashing
behaviour
Meaning
Red LED Lights up
steady
Adapter is in the
start-up process
Red LED Flashes at
intervals of 0.5
sec.
(on/off)
No dLAN connec-
tion exists
Red LED Flashes at
intervals of 2
sec.
(on/off)
Data transmis-
sion rate not in
optimum range *
White
LED
Lights up
steady
An encrypted
dLAN connection
exists and the
adapter is ready
to operate
White
LED
Flashes at
intervals of 0.5
sec.
(on/off)
dLAN encryption
being established
White
LED
Flashing at
intervals of
0.5/50-60 sec.
(On/off)
Adapter is in
PowerSave mode
LED
Flashing
behaviour
Meaning