Initial use 23
devolo dLAN 550+ WiFi
Enabling WiFi Clone at the touch of a button
햷 First press the encryption button with the
home icon on the front side of dLAN 550+ WiFi
and then press the WPS button of the WiFi router
with the access data that you want to apply.
or
Enabling WiFi Clone via the configuration inter-
face.
More information about this function can be found in
Chapter WiFi Clone.
햸 To transfer the WiFi settings of an existing WiFi
adapter to the dLAN 550+ WiFi, first press the
encryption button with the home icon (approx. 1
second). Finally, press the encryption button
with the home icon on the new dLAN 550+ WiFi
(approx. 1second). The entire WiFi configura-
tion is now transmitted to the new
dLAN 550+ WiFi adapter.
햹 The existing WiFi adapter transmits both the
dLAN as well as the entire WiFi configuration
to the new dLAN 550+ WiFi adapter.
햺 To integrate additional dLAN 550+ WiFi devices
into your WiFi network, repeat this step.
The WiFi adapters are now continuously connected
to each other and, from now on, share changes to the
WiFi configuration with each other automatically.
To secure your WiFi network with an individual
password, install devolo Cockpit and proceed
with configuring your network. To do so, read
Chapters 3.4 Installation of devolo software
and 4 Network configuration.
3.4 Installation of devolo software
Downloading my devolo App
The my devolo App is devolo's free app also for
checking and configuring WiFi, dLAN and LAN connec-
tions for the dLAN 550+ WiFi (via smartphone or tab-
let). The smartphone or tablet connects to the
dLAN 550+ WiFi at home via WiFi.
햲 Download the my devolo App to your smart-
phone or tablet computer from the corresponding
store.
The quickest way to find the app is by clicking
the magnifying glass in the store and searching
directly for devolo.
To Next Page
Loading...
Need help?
General
