26 Initial use
devolo dLAN pro 1200+ WiFi ac
forms a delimited dLAN pro network. Shared use of the
dLAN password serves as access control to the dLAN
pro network as well as the encryption, and thereby the
interception protection, of the transmitted data.
The dLAN password can be set in different ways:
dLAN pro network encryption at the touch of a
button (home icon)
햳 First press the encryption button (for about 1
second) on a device in your existing network and
then, within 2 minutes, press the encryption
button with the home icon (for about 1 second)
on the new dLAN pro 1200+ WiFi ac.
The new dLAN pro 1200+ WiFi ac is now integrated
into your existing dLAN pro network.
or
dLAN pro network encryption using
dLAN AVpro manager computer software. More
information can be found in Chapter 3.5 dLAN
AVpro manager.
or
dLAN pro network encryption by entering the
dLAN password in the configuration interface.
More information can be found in Chapter 4.4 Device
configuration.
Integrating the dLAN pro 1200+ WiFi ac into an
existing Wi-Fi network
햴 Establish the Wi-Fi connection with your laptop,
tablet or smartphone and enter the noted Wi-
Fi key as the network security key.
By default, the SSID (e.g. devolo-d7e-3) con-
sists of "devolo", "the last three digits of the
Wi-Fi MAC-address" and the "numbering of
the respective access point". For more infor-
mation on the SSID, refer to Chapter 4.5 Wi-
Fi configuration Access point – Set-
tings.
햵 For the dLAN pro 1200+ WiFi ac to show the
same Wi-Fi configuration as your Wi-Fi router, you
can apply the router's Wi-Fi access data for the
To Next Page
Loading...
