Network configuration 63
devolo dLAN pro 1200+ WiFi ac
4.6.1 Create VLAN
The factory defaults have VLAN 1 configured with
VLAN ID 1. You can configure additional VLANs under
Create VLAN. In doing so, a VLAN (VLAN 1 to VLAN
16) has to be selected and a VLAN ID (1 to 4094) as-
signed. When creating VLANs, already assigned VLAN
IDs cannot be assigned a second time.
When configuring the VLANs and the
VLAN port settings, the configura-
tion interface of the
dLAN pro 1200+ WiFi ac should re-
main accessible, i.e. configurable. If
you ever "lock" yourself out in spite
of this, the device has to be returned
to the factory defaults by being reset
(see the 3.3.4 Reset section).
4.6.2 Overview of configured VLANs
You can see all configured VLANs here
To delete a VLAN, first enable it and then confirm with
Delete. It is not possible to delete all VLANs; one Man-
agement VLAN must remain configured.
To Next Page
Loading...
