Network configuration 59
devolo dLAN pro 1200+ WiFi ac
4.5.6 Wi-Fi client
If you would like the dLAN pro 1200+ WiFi ac to act as
client, select Wi-Fi client mode under Wi-Fi config-
uration in the respective frequency band. As a Wi-Fi
client, you can only use and configure the two frequen-
cy bands separately from each other. Confirm your en-
try with Save.
The operating state of the device is displayed under
4.3 Status overview. If the Wi-Fi client mode is acti-
vated on both frequency bands, the display of Wi-Fi ac-
cess points is removed from the status overview.
You can find the description of the Wi-Fi time control
setting in Chapter 4.5.4 Wi-Fi time control.
To Next Page
Loading...
