Initial use 25
devolo dLAN pro 1200+ WiFi ac
3.3.5 Wi-Fi antennas
The internal Wi-Fi antennas are for connecting to other
network devices wirelessly.
3.3.6 Integrated electrical socket
If you connect additional devices using a power strip,
plug this power strip into the electrical socket of the
dLAN pro 1200+ WiFi ac. The integrated mains filter
eliminates any noise of connected devices and signifi-
cantly improves data transmission in the network.
3.4 Connecting the
dLAN pro 1200+ WiFi ac
The device may be used only indoors.
Note the WiFi key of the
dLAN pro 1200+ WiFi ac before the network-
ing procedure. You will find the device's
unique key (WiFi key) on the label on the back
of the housing.
In order to connect the
dLAN pro 1200+ WiFi ac with your laptop
later via Wi-Fi, tablet or smartphone, enter the
noted WiFi key as the network security key.
In the following sections we describe how to connect
the dLAN pro 1200+ WiFi ac and integrate it into the
network. We clarify the exact procedures based on po-
tential network scenarios:
3.4.1 Single Kit—Expanding an existing
dLAN pro network
햲 Plug the dLAN pro 1200+ WiFi ac into a wall
socket. The device is ready to operate once the
indicator light of the encryption button with the
home icon turns white (after approximately 45
seconds).
To disconnect the
dLAN pro 1200+ WiFi ac from the
mains supply, unplug the device from
the electrical socket. The power out-
let and all connected network devic-
es should be easily accessible so that
you can pull the mains plug quickly if
needed.
Integrating the dLAN pro 1200+ WiFi ac into an
existing dLAN pro network
Before you can use the dLAN pro 1200+ WiFi ac in
your dLAN pro network, first you have to connect it to
your existing dLAN pro devices as a network. This is ac-
complished by using the shared dLAN password. This
To Next Page
Loading...
