Network configuration 26
devolo Magic 1 WiFi
4 Network configuration
The devolo Magic 1 WiFi has a built-in web interface that
can be called up using a standard web browser. All settings
for operating the device can be modified here.
4.1 Calling up the built-in web interface
You can access the built-in online web interface for the
devolo Magic 1 WiFi in different ways:
Using the devolo App on your smartphone or tablet,
you can access the device's web interface by going to
the devolo App overview page and tapping on the
gear/arrow.
You can find more information on devolo App in Chap-
ter
3.4 Installation of devolo software
.
or
Using the Cockpit software under Start All Pro-
grams devolo devolo Cockpit, you can get to
the device's web interface by clicking on the corre-
sponding tab for the devolo Magic 1 WiFi. Then the
program determines the current IP address and starts
the configuration in the web browser.
By default, the web interface will open directly. Ho-
wever, if an access password has been set via the op-
tion
System
Management
, you have to enter
that password first. Read more about this under
4.7
System
.
4.2 General information about the menu
All menu functions are described in the corresponding in-
terface as well as in the associated chapter in the manual.
The sequence of the description in the manual follows the
structure of the menu. The figures for the device interface
serve as examples.
Logging in
The web interface is not password protected. Assigning a
login password is mandatory when logging in for the first
time to prevent unauthorised access by third parties.
Enter your existing password each time you login again
and confirm by pressing Log in.
To Next Page
Loading...
Need help?
General
