13 Introduction
devolo Magic 1 WiFi
2.3 Pairing – Establishing a PLC connec-
tion
devolo Magic adapters that are in the factory default con-
dition, i.e. have been recently purchased or successfully re-
set (see Chapter 3.5 Removing the devolo Magic
adapter from a PLC network), automatically start to at-
tempt to pair (establish a PLC connection) with
anotherdevolo Magic adapter when reconnected to the
mains supply.
Starting up a new devolo Magic PLC network
After plugging the devolo Magic adapters into available
power sockets, a new devolo Magic network is established
automatically within 3 minutes.
Fig. 2: devolo Magic 1 WiFi with country-specific
connector and power socket
Fig. 3 Network connectors
To Next Page
Loading...
