Network configuration 46
devolo Magic 1 WiFi mini
The devolo Magic 1 WiFi mini offers two different
variants for transmitting these encryption keys:
WPS using WPS pushbutton
1 Start the encryption process on the
devolo Magic 1 WiFi mini
a By pressing the Wi-Fi button on the front
side of the device or
a By pressing the corresponding Start button
on the user interface under WiFi WPS
Pushbutton.
2 Then either press the WPS key of the Wi-Fi
device you are adding or enable the WPS
mechanism in the Wi-Fi settings of the Wi-Fi
device. Now the devices exchange their encryp-
tion keys and establish a secure Wi-Fi connec-
tion. The Wi-Fi LED on the front panel indicates
the synchronisation process by flashing.
WPS via PIN
To interconnect Wi-Fi devices in your wireless net-
work securely using a PIN variant, go to the web in-
terface and, under WiFi WPS WPS PIN, enter
the WPS PIN generated by your Android smart-
phone or tablet and start the encryption process by
pressing the corresponding Start button.
Use of the WPS method implies the use of the
WPA/WPA2/WPA3 encryption standard.
Therefore take note of the following automatic
settings:
b If under WiFi WiFi networks, the No
encryption option is selected in advance,
WPA2 is set automatically. The newly genera-
ted password is displayed under WiFi WiFi
networks in the Key field.
b If under WiFi WiFi networks, the WPA/
WPA2/WPA3 option is selected in advance,
this setting remains with the previously
assigned password.
Magic_1_WiFi_mini.book Seite 46 Mittwoch, 16. Oktober 2019 11:27 11
To Next Page
Loading...
Need help?
General
Weight and Dimensions
