EasyManua.ls Logo

Devolo Magic 1 WiFi mini - Power Management and Device Settings

Devolo Magic 1 WiFi mini
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Network configuration 54
devolo Magic 1 WiFi mini
In Power Management, you can enable Power-
save mode and Standby mode on the
devolo Magic 1 WiFi mini.
If Powersave mode has been enabled, the
devolo Magic 1 WiFi mini switches to PowerSave
mode automatically whenever reduced data trans-
mission over ethernet is detected.
The latency (time for transmitting a data
packet) may be negatively affected if very slow
data transmission is detected.
If Standby mode is enabled, the
devolo Magic 1 WiFi mini automatically switches
to Standby mode if no ethernet connection has
been enabled, i.e. if no network device (e.g. com-
puter) is switched on and connected to the net-
work interface and if Wi-Fi is disabled.
In this mode, the devolo Magic 1 WiFi mini is not
accessible over the Powerline network. As soon as
the network device (e.g. computer) connected to
the network interface is switched on again, your
adapter can also be accessed over the electrical
wiring again.
Powersave mode is disabled in the
devolo Magic 1 WiFi mini factory default settings.
Standby mode is enabled in the
devolo Magic 1 WiFi mini factory default condi-
tion.
The LED settings let you disable the LED status
display of the WiFi and Powerline LEDs. An error
status is indicated by corresponding flashing
behaviour regardless of this setting
For information on the LED behaviour of the
devolo Magic adapter in standby mode, refer to Chapter
2.3.1 Reading the Powerline indicator light.
and 2.3.3 Reading the Wi-Fi indicator light.
You can completely disable the operating but-
tons on the devolo Magic adapter in order to pro-
tect yourself against possible changes. Simply
disable the Enable Powerline button or Enable
Wi-Fi button option.
The operating buttons are enabled in the
devolo Magic 1 WiFi mini factory default settings.
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin. The Time server (NTP)
option lets you specify a time server. A time server
is a server on the Internet whose task consists of
providing the exact time. Most time servers are
Magic_1_WiFi_mini.book Seite 54 Mittwoch, 16. Oktober 2019 11:27 11

Other manuals for Devolo Magic 1 WiFi mini

Related product manuals