Page 53 of 63
Sliding Sleeve/ Snap Ring Assembly. Use Service Tool 559619-99.
Sliding Sleeve (91) 487236-00
Locking Bush (92) 487246-00
Damper (90) 486244-00
Washer (89) 487241-00
Seal (87) 487238-00
Snap Ring (88) 487205-00
q Place the Locking Bush (92) into the wide end of the Sliding Sleeve (91)
and make sure that it is seated correctly.
q Turn the Sliding Sleeve over.
q Fit the Chisel Damper (90).
q Place a new Washer (89) on top of the Damper with the recess facing
out.
To Next Page
Loading...
