DS-CAM-640c & DS-CAM-1100m
TECHNICAL REFERENCE MANUAL
1. Table of contents
1. Table of contents 1
2. About this document 1
2.1. Legend 1
3. Key features 2
3.1. System Requirements 3
3.1.1 Basic configuration 3
3.1.2 Optimal configuration 3
4. Technical data 4
4.1. Specifications 4
4.2. DS-CAM-640c & DS-CAM-1100m Dimensions 6
4.3. Scope of supply 7
4.3.1. DS-CAM-640c & DS-CAM-1100m Scope of supply 7
4.3.2. DS-CAM-640c & DS-CAM-1100m Accessories 8
4.4. Camera pinouts 8
4.4.1. DATA CONNECTOR PINOUT 9
4.4.2. POWER CONNECTOR PINOUT 9
4.5. Connection examples 10
4.5.1. Stand-alone DS-CAM 10
4.5.2. SIRIUS with DS-CAM 11
4.5.3. SBOX, SIRIUS with DS-CAM 11
4.5.4. KRYPTON® connection example 12
4.5.5. Multi-camera solution 12
4.5. Resolutions / Framerates 13
5. Installation and start-up 14
5.1. DewesoftX® full installer 14
5.2. DewesoftX® partial installation 15
5.3. Manual installation 17
5.3.1. Required files 17
5.3.2. Adding GigE Addon 17
5.3.3. Installing GigE Addon 17
5.4. Step-by-step procedure for a first start-up 18
5.4.1. Install OptoMotive_OptoStreamSDK 18
5.4.2. Connect and power up 19
5.4.3. Assigning IP address to camera 19
5.4.4. Enable video 20
5.4.5. Preview and settings 21
6. Troubleshooting guide 22
6.1. No data in DewesoftX® camera setup 22
6.2. The GigE checkbox in Settings is missing 22
6.3. No picture shown, “No frames received” error 22
DS-CAM-640c & 1100m V22-1 I
To Next Page
Loading...
Need help?
General