DEWESOFT DS-CAM-640c User Manual

DS-CAM-640c & DS-CAM-1100m
TECHNICAL REFERENCE MANUAL
5.4.2. Connect and power up
Connect the camera to the PC via Ethernet cable and power it up.
Important
DS-CAM-640c & DS-CAM-1100m require a power supply with 24VDC ± 20% capable of providing
at least 0,5A / 12W or more.
5.4.3. Assigning IP address to camera
The DS-CAM-640c & DS-CAM-1100m support DHCP, so connecting them to a managed network should
be a straightforward procedure. Open the OptoStreamViewer to check if all of the connected cameras
are recognized and working by selecting the Control tab and running the Find devices command.
When cameras are recognized you can change their IP with Control → Set Ip To Device
Image 16. Set Ip To Device procedure.
or connect for adjustment and preview with Control → Connect device.
Image 17. Connecting devices to OptoStreamViewer.
DS-CAM-640c & 1100m V22-1 19/34

DEWESOFT DS-CAM-640c Specifications

General

Brand	DEWESOFT
Model	DS-CAM-640c
Category	Digital Camera
Language	English