DS-CAM-640c & DS-CAM-1100m
TECHNICAL REFERENCE MANUAL
Windows 10 Control panel → network and internet → view network status and tasks (network
and sharing center) → change adapter settings → right-mouse-click on LAN connection →
Properties → Configure → Advanced → Jumbo Frame → set to highest value (e.g. 9kB MTU))
● Also, an overloaded DewesoftX® setup (many displays, e.g. high-resolution FFT instruments) will
take system power. Try at first only with camera video instruments.
● Press <Ctrl>+<Shift>+<P> in DewesoftX® Measure mode. On the right side, the performance
monitor will appear. Watch the Cam video buffer. It should stay stable at low values.
Image 23. DewesoftX® Performance monitor
DS-CAM-640c & 1100m V22-1 26/34
To Next Page
Loading...