Dexter Laundry WC0900-XA12ECX User Manual

Plus Cycle Options:
The Plus Cycle options allow for the user to prompt the customer for varying vend prices based on addi-
tional wash baths chosen. In general, the user can program the additional wash baths in a similar manner
to what was described in the “Cycles” Options section.
It also allows the user to return the programmable values to the factory default setting. No plus cycle op-
tions are active using the factory default. To reset all values in the Plus Cycles option to factory default,
press “Enter” when the “DEFAULT” prompt is shown. Press “Enter” again when the “RESET” prompt is
shown to conrm the action.
Figure 6, shown below, shows the next level options for Plus Cycle Options:
NO CYCLE -
1:00-15:00
(1:00 increments)
CYCLE_TIME
HOT
WARM
COLD
WATER_TEMP
0:00-10:00
(1:00 increments)
SPIN_TIME
PRE_WASH
FREE – 00.01-99.99
(00.01 increments)
PRICE
CYCLE_TIME
EXTENDED_WASH
PRICE
FREE – 00.01-99.99
(00.01 increments)
NO CYCLE -
1:00-15:00
(1:00 increments)
CYCLE_TIME
COLD
WARM
WATER_TEMP
SPIN_TIME
0:00-10:00
(1:00 increments)
FREE – 00.01-99.99
(00.01 increments)
PRICE
EXTRA_RINISE
DEFAULT RESET
PLUS_CYCLE_FEATURES
NO CYCLE -
1:00-15:00
(1:00 increments)
SuperWash
SET_SUPERWASH
PRICE
RESET
RESET
FREE – 00.01-99.99
(00.01 increments)
44
Part # 8533-081-001 1/18

Dexter Laundry WC0900-XA12ECX Specifications

General

Brand	Dexter Laundry
Model	WC0900-XA12ECX
Category	Washer
Language	English